How To Start A Gas Fireplace

Gas Fireplace Operation The video walks through the simple steps on starting and operating a gas fireplace.

How to start a gas fireplace. Once the wood is well-lit you can turn off the gas starter. Simply push the On button and the pilot should ignite. Once you begin the operation of the gas fireplace you can run the pilot light in one of two modes.

These flames light the wood. But you may want to keep a few ashes around to help build a fire in your fireplace. Note that gas fireplaces with an electric ignition typically will not work if the power is out.

If your unit is operated by a wall switch or remote you should be able to simply push the button or flip the switch to the on position to start the fireplace. The first think you want to do is pull the cover off the fireplace. Bring on the heat by first approaching the gas valve and making sure it is on.

Test-fire the interior gas ignition under the logs and make sure it lights correctly. Replacement piezo ignitor httpamznto2i7clAn Replacement Thermopile httpamznto2j1sFm3WARNING. Consisting of a tube mounted under the grate a gas starter uses natural gas to create flames through several small holes along its length.

Step 1 - Open the Access Panel Remove the front plating or open the access panel on your fireplace appliance. Some gas fireplaces use electricity to ignite and adjust the flames. Locate the pilot light which could be behind a panel or under the main frame of the unit.

A flashlight is handy for finding this small but important dial. While in the ignite position press down on the knob until you begin to hear a clicking sound. How to Start a Gas Fireplace.